Disassembly and folding of inflatable boats


If the inflatable boat is not stored well after use, it will affect future use and may cause damage to the inflatable boat. Inflate the deck and then inflate the buoyancy tubes, and you can immediately take family and friends to fishing or sea rides. Inflatable boat is an inflatable boat, mostly made of rubber, so it is also called inflatable boat. Uninflated can be compressed. Driven by motor or human power. Can be used for recreational games and water rescue and other purposes, but also by the national Marine Corps used. Disassemble and fold the dinghy in the correct way. Inflatable boat An inflatable boat, mostly made of rubber, so it is also called a rubber boat. Uninflated can be compressed. Driven by motor or human power. Can be used for recreational games and water rescue and other purposes. The following describes the inflatable boat disassembly and folding problems.

1. When disassembling, choose a relatively flat ground, clean up the hard objects nearby, and pay attention to the cleanliness and dryness of the hull.

2. Disassemble the ship's oars and additional accessories on the ship, and open all air valves (press the air spool in a clockwise direction, rotate it slightly, lock the air core, and release most of the gas).

3. If the ground wooden or aluminum boat, remove the card strips on both sides of the floor, and then remove the blocks from the floor.

4. Use your feet to pump air out of every airbag on the boat.

5. Lay the hull, fold the sides of the ship's side inward, and fold the stern to the bow.

6. Fold and put into the storage bag and choose a safe storage area.

Before folding the rubber boat, wash and dry the sand and ashes outside with clear water, open the inflation valve, release the air in the airbag, collect other accessories outside the boat, and lay the rubber boat flat. It is recommended to fold both sides inward and from the bow. Fold in the direction to avoid degumming and open the protective belt, and reduce the volume after closing the boat.

If conditions permit, rubber boats are stored by 2/3 air when not in use. If the folds remain for a long time, the folds may be degummed and airtight.

Other dynamics


Disassembly and folding of inflatable boats

If the inflatable boat is not stored well after use, it will affect future use and may cause damage to the inflatable boat. Inflate the deck and then inflate the buoyancy tubes, and you can immediately take family and friends to fishing or sea rides. Inflatable boat is an inflatable boat, mostly made of rubber, so it is also called inflatable boat.


Daily Maintenance of FRP Inflatable Boat

Due to the glass fiber hull, commonly known as glass fiber reinforced plastic hull, the surface will lose its luster before leaving the factory after cruising, mooring in the dock and soaking in seawater for a long time, and it will also be contaminated with stolen goods, dust, sea baths, marine organisms and salt crystal layer left after evaporation of seawater splashed on the yacht. These substances will have certain destructive effect on the surface gel coat. After each use, fresh water should be used, if it is not used for a long time, it should be cleaned at least once a week. Cleaning should also be based on their own situation and the location of the water quality and choose the appropriate cleaning fluid.


Inflatable fishing boat rubber boat how to maintain

Some rubber dinghies with several hundred yuan on the Internet can be said to have broken down after several times of use. The material, thickness, bonding method, glue and workmanship of the inflatable fishing dinghies can last longer for military purposes, but they are too heavy. The main factor affecting the life of the rubber boat is ultraviolet light, debris in the water. Therefore, the main means to extend the life is to prevent ultraviolet rays and prevent some unnecessary friction.


What is the gas of an inflatable boat and how much air pressure is appropriate

Inflatable boat, also known as inflatable assault boat, is a kind of inflatable assault boat. When not in use, the gas will be released and preserved. What gas is the inflatable boat filled? In the past, the gas in inflatable boats was hydrogen, but because hydrogen has certain risks and risks of explosion, helium is used instead. Helium is a rare gas with smaller density than air and stable chemical properties. It is a safe gas. It is commonly used as protective gas in chemical experiments or factories. Of course, it is also possible to use ordinary air without affecting actual use.


How to judge the quality of inflatable boat

Nowadays, many people buy inflatable boats by themselves. Because they don't know about inflatable boats, they have been wondering whether the quality of the inflatable boats they buy is good. The following small series for everyone to introduce the evaluation method to judge the quality of inflatable boats:


What factors affect the use of inflatable boats

No matter how good the inflatable boat is, it will be damaged, especially the rubber boat material is easily damaged by sharp objects. In the process of use, many factors will affect the use of rubber boats, so we must pay attention to these points in the daily use process.

Product Recommendation

Mainly patrol boats, FRP inflatable yachts, assault boats, fishing boats and other 12 series of more than 40 specifications of the product-based

Inflatable boat 430

Safe and reliable · Fashionable · Streamed and elegant


Inflatable boat 430

Safe and reliable · Fashionable · Streamed and elegant


Glass steel ship 390B

Safe and reliable · Fashionable · Streamed and elegant



©2024 Qingdao LanYu Yacht Co.,Ltd    Label     300.cn      Business License     Cloud information