Daily Maintenance of FRP Inflatable Boat


Due to the glass fiber hull, commonly known as glass fiber reinforced plastic hull, the surface will lose its luster before leaving the factory after cruising, mooring in the dock and soaking in seawater for a long time, and it will also be contaminated with stolen goods, dust, sea baths, marine organisms and salt crystal layer left after evaporation of seawater splashed on the yacht. These substances will have certain destructive effect on the surface gel coat. After each use, fresh water should be used, if it is not used for a long time, it should be cleaned at least once a week. Cleaning should also be based on their own situation and the location of the water quality and choose the appropriate cleaning fluid.

Cleaning principle: wipe the surface of the yacht with your hands, if it is not dirty, rinse with fresh water and dry it.

Polishing at least once every season during use; use the boat throughout the year and polish the boat every 3-4 months. Here, I would like to remind everyone that if there are only slight defects and broken marks on the surface, use a soft cloth to dip a small amount of abrasive for grinding.

Daily simple maintenance of inflatable boats. Rinse with fresh water (if there is oil, scrub with washing powder), dry and pack in a cool place. If there is a place, of course, the air is flat, the air pressure is low, and the ship shape can be maintained.

In addition: the engine should also be maintained.

1: run out, burn out the oil in the engine carburetor. ---- Pull out the oil pipe and let the engine start until it stalls!

2: Used in seawater, and then run in fresh water for a few minutes (that is, the time to burn the oil in the carburetor), so that the fresh water washes away the seawater in the cooling water channel.

Other dynamics


Disassembly and folding of inflatable boats

If the inflatable boat is not stored well after use, it will affect future use and may cause damage to the inflatable boat. Inflate the deck and then inflate the buoyancy tubes, and you can immediately take family and friends to fishing or sea rides. Inflatable boat is an inflatable boat, mostly made of rubber, so it is also called inflatable boat.


Daily Maintenance of FRP Inflatable Boat

Due to the glass fiber hull, commonly known as glass fiber reinforced plastic hull, the surface will lose its luster before leaving the factory after cruising, mooring in the dock and soaking in seawater for a long time, and it will also be contaminated with stolen goods, dust, sea baths, marine organisms and salt crystal layer left after evaporation of seawater splashed on the yacht. These substances will have certain destructive effect on the surface gel coat. After each use, fresh water should be used, if it is not used for a long time, it should be cleaned at least once a week. Cleaning should also be based on their own situation and the location of the water quality and choose the appropriate cleaning fluid.


Inflatable fishing boat rubber boat how to maintain

Some rubber dinghies with several hundred yuan on the Internet can be said to have broken down after several times of use. The material, thickness, bonding method, glue and workmanship of the inflatable fishing dinghies can last longer for military purposes, but they are too heavy. The main factor affecting the life of the rubber boat is ultraviolet light, debris in the water. Therefore, the main means to extend the life is to prevent ultraviolet rays and prevent some unnecessary friction.


What is the gas of an inflatable boat and how much air pressure is appropriate

Inflatable boat, also known as inflatable assault boat, is a kind of inflatable assault boat. When not in use, the gas will be released and preserved. What gas is the inflatable boat filled? In the past, the gas in inflatable boats was hydrogen, but because hydrogen has certain risks and risks of explosion, helium is used instead. Helium is a rare gas with smaller density than air and stable chemical properties. It is a safe gas. It is commonly used as protective gas in chemical experiments or factories. Of course, it is also possible to use ordinary air without affecting actual use.


How to judge the quality of inflatable boat

Nowadays, many people buy inflatable boats by themselves. Because they don't know about inflatable boats, they have been wondering whether the quality of the inflatable boats they buy is good. The following small series for everyone to introduce the evaluation method to judge the quality of inflatable boats:


What factors affect the use of inflatable boats

No matter how good the inflatable boat is, it will be damaged, especially the rubber boat material is easily damaged by sharp objects. In the process of use, many factors will affect the use of rubber boats, so we must pay attention to these points in the daily use process.

Product Recommendation

Mainly patrol boats, FRP inflatable yachts, assault boats, fishing boats and other 12 series of more than 40 specifications of the product-based

Inflatable boat 430

Safe and reliable · Fashionable · Streamed and elegant


Inflatable boat 430

Safe and reliable · Fashionable · Streamed and elegant


Glass steel ship 390B

Safe and reliable · Fashionable · Streamed and elegant



©2024 Qingdao LanYu Yacht Co.,Ltd    Label     300.cn      Business License     Cloud information