If the inflatable boat is not stored well after use, it will affect future use and may cause damage to the inflatable boat. Inflate the deck and then inflate the buoyancy tubes, and you can immediately take family and friends to fishing or sea rides. Inflatable boat is an inflatable boat, mostly made of rubber, so it is also called inflatable boat.

Due to the glass fiber hull, commonly known as glass fiber reinforced plastic hull, the surface will lose its luster before leaving the factory after cruising, mooring in the dock and soaking in seawater for a long time, and it will also be contaminated with stolen goods, dust, sea baths, marine organisms and salt crystal layer left after evaporation of seawater splashed on the yacht. These substances will have certain destructive effect on the surface gel coat. After each use, fresh water should be used, if it is not used for a long time, it should be cleaned at least once a week. Cleaning should also be based on their own situation and the location of the water quality and choose the appropriate cleaning fluid.

Some rubber dinghies with several hundred yuan on the Internet can be said to have broken down after several times of use. The material, thickness, bonding method, glue and workmanship of the inflatable fishing dinghies can last longer for military purposes, but they are too heavy. The main factor affecting the life of the rubber boat is ultraviolet light, debris in the water. Therefore, the main means to extend the life is to prevent ultraviolet rays and prevent some unnecessary friction.

Inflatable boat, also known as inflatable assault boat, is a kind of inflatable assault boat. When not in use, the gas will be released and preserved. What gas is the inflatable boat filled? In the past, the gas in inflatable boats was hydrogen, but because hydrogen has certain risks and risks of explosion, helium is used instead. Helium is a rare gas with smaller density than air and stable chemical properties. It is a safe gas. It is commonly used as protective gas in chemical experiments or factories. Of course, it is also possible to use ordinary air without affecting actual use.

Nowadays, many people buy inflatable boats by themselves. Because they don't know about inflatable boats, they have been wondering whether the quality of the inflatable boats they buy is good. The following small series for everyone to introduce the evaluation method to judge the quality of inflatable boats:

No matter how good the inflatable boat is, it will be damaged, especially the rubber boat material is easily damaged by sharp objects. In the process of use, many factors will affect the use of rubber boats, so we must pay attention to these points in the daily use process.

Apart from the saying "bigger is better", there are several considerations. One is the shelf life of the boat. A good factory and retailer can provide a relatively long shelf life. The second is accessories, valves and hardware: if you are buying a boat for the first time, it is easy to overlook the quality of the equipment and accessories of the boat.

Choose the right floor form 1. balancing the contradiction between portability and performance on the water 2. choose the right hull material according to the environment in which the boat is used 3. buy the largest boat within your budget and space requirements.

1. Small range of tearing, cutting and repair of small holes * If the hole or scratch of the boat is less than 1/2 inch (12.7mm), you can directly attach a round patch, the patch *** has a small diameter of 3 inches (76.2mm)