What is the gas of an inflatable boat and how much air pressure is appropriate

Release time:

2024-01-16 09:36

Source:

Inflatable boat, also known as inflatable assault boat, is a kind of inflatable assault boat. When not in use, the gas will be released and preserved. What gas is the inflatable boat filled?

In the past, the gas in inflatable boats was hydrogen, but because hydrogen has certain risks and risks of explosion, helium is used instead. Helium is a rare gas with smaller density than air and stable chemical properties. It is a safe gas. It is commonly used as protective gas in chemical experiments or factories. Of course, it is also possible to use ordinary air without affecting actual use.

If the inflatable boat is not full of air, it cannot travel on the water, but it will not work if it is in a saturated state of inflation, which will accelerate aging and damage. Therefore, it is necessary to inflate and deflate regularly. How can the inflatable boat inflate and deflate?

1. Bleed method: find the position of the air nozzle of the inflatable boat, unscrew the horizontal bar outside the air nozzle, then look at a spring-like protrusion inside, press it down, rotate counterclockwise and then release it.

2. Inflation method: Before inflating, release the previous gas. After deflating, twist the spring-like protrusion in the opposite direction, and then inflate the assault boat with the equipped inflator. Attention should be paid when inflating. The inflatable boat buoy is divided into multiple air chambers, and the interior is separated by diaphragms. Pay attention to uniformity when inflating. Do not fill one air chamber at a time, and first inflate each air chamber to 60%, turn back and fill up again.

Inflatable boats need to be inflated, but pay attention to the air pressure when inflating. Ordinary car tires do not reach a certain air pressure, and the wheels are biased. Inflatable boats are inflated only to provide buoyancy and molding, so there is little requirement for inflatable air pressure, as long as it does not exceed the specified air pressure.

Generally speaking, the air pressure of the inflatable boat is suitable for nine of the standard air pressure. When inflating, the buoy feels hard.

Inflatable fishing boat rubber boat how to maintain

How to judge the quality of inflatable boat

Other dynamics

Disassembly and folding of inflatable boats

If the inflatable boat is not stored well after use, it will affect future use and may cause damage to the inflatable boat. Inflate the deck and then inflate the buoyancy tubes, and you can immediately take family and friends to fishing or sea rides. Inflatable boat is an inflatable boat, mostly made of rubber, so it is also called inflatable boat.

Daily Maintenance of FRP Inflatable Boat

Due to the glass fiber hull, commonly known as glass fiber reinforced plastic hull, the surface will lose its luster before leaving the factory after cruising, mooring in the dock and soaking in seawater for a long time, and it will also be contaminated with stolen goods, dust, sea baths, marine organisms and salt crystal layer left after evaporation of seawater splashed on the yacht. These substances will have certain destructive effect on the surface gel coat. After each use, fresh water should be used, if it is not used for a long time, it should be cleaned at least once a week. Cleaning should also be based on their own situation and the location of the water quality and choose the appropriate cleaning fluid.

Inflatable fishing boat rubber boat how to maintain

Some rubber dinghies with several hundred yuan on the Internet can be said to have broken down after several times of use. The material, thickness, bonding method, glue and workmanship of the inflatable fishing dinghies can last longer for military purposes, but they are too heavy. The main factor affecting the life of the rubber boat is ultraviolet light, debris in the water. Therefore, the main means to extend the life is to prevent ultraviolet rays and prevent some unnecessary friction.

What is the gas of an inflatable boat and how much air pressure is appropriate

Inflatable boat, also known as inflatable assault boat, is a kind of inflatable assault boat. When not in use, the gas will be released and preserved. What gas is the inflatable boat filled? In the past, the gas in inflatable boats was hydrogen, but because hydrogen has certain risks and risks of explosion, helium is used instead. Helium is a rare gas with smaller density than air and stable chemical properties. It is a safe gas. It is commonly used as protective gas in chemical experiments or factories. Of course, it is also possible to use ordinary air without affecting actual use.

How to judge the quality of inflatable boat

Nowadays, many people buy inflatable boats by themselves. Because they don't know about inflatable boats, they have been wondering whether the quality of the inflatable boats they buy is good. The following small series for everyone to introduce the evaluation method to judge the quality of inflatable boats:

What factors affect the use of inflatable boats

No matter how good the inflatable boat is, it will be damaged, especially the rubber boat material is easily damaged by sharp objects. In the process of use, many factors will affect the use of rubber boats, so we must pay attention to these points in the daily use process.